Elektronikbox Rear Light Module – Rear Light EU-I

Almost every motorcycle in US runs a brake light / turn signal combination in the way, that 2 lamps works as brake light and as turn signal. This makes a conversion of an imported bike, according to the requirements in the EU, a bit tricky and cost intensive due to some additional wiring and workshop hours. The Rear Light EU is a module for Indian bikes with a hazard light function. It converts the two signals from the original turn signal / brake light combination into four separate outputs for brake light / taillight and turn signals. A conversion of a US bike to EU regulations is much easier and less cost intensive with this new module.A brake light dim function, for taillight use, is activated by default and the brightness of the brake light dimmed down to 30% when the brake switch not activated. This allows the user to just wire one cable to the brake light. You can activate the function if you wire this cable to + 12 Volt or disable this function if you wire this cable to ground. Note: Not compatible with US cars

• Category: Switches ignition
• Manufacturer part number: Rear Light EU-I