Indian motorcycles switch the outputs for the turn signals to minus, when active. This make a change of the original turn signals against aftermarket turn signals a bit tricky. This polarity changer is the solution. It converts the ground switched signal from the BMC (Body Control Module) or turn signal relay to a positive supply voltage for the turn signals. The module contains 2 separate channels. The maximum load is 60 Watt per side. With the green „Mode” cable you can decide if the outputs are switched on or off for 0,5 seconds when power on the module. This prevents the outputs against wrong signals, when the power is switched-on, when a connected control box needs a bit more time to power up.
- Category: Switches ignition
- Manufacturer part number: Pol Changer
Opinie
Na razie nie ma opinii o produkcie.