Motion Pro Suspension Vise – 08-0628

This is a front fork & rear shock absorber maintenance tool. It is used to securely hold the front fork slider for maintenance like oil & seal change. It also will hold the rear shock absorber, on body, shaft or shock reservoir, for maintenance work like spring, piston rod, seal head removal etc. – Designed to make suspension service simple and quick. – Holds shocks and forks securely while you change oil, re-valve, or change seals. – Pivoting head holds parts in any position, with mechanical stops every 45 degrees. – Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system. – Large side holds 40 mm to 61 mm diameter parts. – Small side holds 16 mm to 34 mm diameter parts. – Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a workbench. – Movable fluid catch pan with mesh insert, and threaded drain bung. – HOW IT WORKS ON FORKS — Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip. – Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements. – Can be used to assist in removing compression valve assembly (use of stock front axle required). – HOW IT WORKS ON REAR SHOCK ABSORBERS – – Holds shock firmly around shock body, shaft or shock reservoir. – Facilitates removal of piston rod and seal head. – Facilitates removal of shock reservoir caps, chamber pistons or bladder. – Holds shock to remove spherical bearings or needle bearings. – Holds shocks for removal of shock spring.

• Category: Tools shock absorber
• Manufacturer part number: 08-0628